E6B CALC / LEARN. LIFT. REPEAT.

FAA Chart Reading Lesson

Explore FAA-style density altitude, crosswind and weight and balance charts with a clear E6B lesson and worked practice examples.

The FAA knowledge test hands you charts and expects you to read them. Three come up again and again: the density altitude chart, the crosswind component chart, and a loading graph with a center of gravity moment envelope.

Every chart works the same way. Find your first number on one scale, move straight to the line or arc for your second number, then move straight across to read the answer. When your number falls between two lines, picture a line in between and keep going.

For weight and balance, read a moment for each load from the loading graph, add the weights and moments, then plot the totals on the envelope. Inside the envelope is within limits. Over the top line is overweight. Past the right edge means the center of gravity is too far aft.

Find the first number, go straight to the line for the second, then straight across to the answer

The three charts you will practice

Density altitude chart with a pressure altitude conversion tableDensity altitude chartDiagonal lines: pressure altitude in feet−20−10010203040Outside air temperature (°C)020406080100°FS.L.1,0002,0003,0004,0005,0006,0007,0008,0009,00010,00011,00012,00013,00014,000Density altitude (feet)S.L.1,0002,0003,0004,0005,0006,0007,0008,0009,00010,00011,00012,000Standard temperaturePressure altitude conversionAltimeter settingConversion factor29.086229.176829.267329.357929.448529.539229.629829.720529.811229.92029.92030.0−7330.1−16530.2−25730.3−34830.4−44030.5−53130.6−62230.7−71230.8−80330.9−893Add the factor to field elevationto get pressure altitude.
Density altitude chart with an altimeter setting conversion table. Density altitude chart. Outside air temperature runs across the bottom from −20 to 40°C. Density altitude runs up the side from sea level to 14,000 feet. Diagonal lines show pressure altitude every 1,000 feet. A table beside it gives the conversion factor for each altimeter setting.
Crosswind component chartCrosswind component chartArcs: wind speed in knots. Straight lines: angle between the wind and the runway.0010102020303040405050Crosswind component (knots)Headwind component (knots)0°10°20°30°40°50°60°70°80°90°10 kt20 kt30 kt40 kt50 kt
Crosswind component chart. Crosswind component chart. Arcs show wind speed every 10 knots. Straight lines from the corner show the angle between the wind and the runway every 10 degrees. Crosswind component reads along the bottom and headwind component up the side.
Loading graph and center of gravity moment envelopeLoading graphCenter of gravity moment envelope051015202530050100150200250300350400Load moment ÷ 1,000 (pound-inches)Load weight (pounds)Pilot andfront passengerRearpassengersFuelBaggage10 gal20 gal30 gal40 gal50607080901001101201,5001,6001,7001,8001,9002,0002,1002,2002,3002,4002,500Loaded airplane moment ÷ 1,000 (pound-inches)Loaded airplane weight (pounds)NormalcategoryMaximum weight 2,400 lbPractice airplane. Empty weight 1,416 lb, empty moment 53.4. Fuel weighs 6 lb per gallon.
Loading graph and center of gravity moment envelope. Loading graph with lines for the front seats, rear seats, fuel and baggage, next to a center of gravity moment envelope for a practice airplane with a maximum weight of 2,400 pounds.

Expanded practice for this topic is coming with the Full Pass. Explore the calculators for free.

Explore the free tools
YOUR NEXT CHAPTER

More learning is on the horizon.

The Full Pass will open practice across all 12 topics, FAA-style chart reading and the expanded timed E6B test.

Checkout isn’t open yet. In the meantime, every calculator and the practice cockpit are free to explore.

One-time payment through Payhip. All sales are final. Refund policy. Already bought it? Enter your code.

See what’s included